Practical Training Curriculum, Site Preconditions and Handover Checklist for MAIKONG Colon Hydrotherapy Machines

Who this curriculum is for

This guide is written for Colon Hydrotherapy Clinic Owners in the United States who are preparing to install MAIKONG systems (for example MK‑540 and MK‑530). Our objective is to help you link site readiness to an actionable operator training syllabus and an objective delivery acceptance process so training occurs only after the clinic meets the required preconditions.

Installation prerequisites you must confirm before scheduling training

Do these checks on site and document results in writing. If any item is outstanding, schedule corrective work before factory engineers arrive or remote training begins.

• Potable water and drainage: provide stable potable cold water feed and a compliant floor or wall drain suitable for clinical effluent; the machine includes intelligent automatic water inlet control and built‑in sewage routing but local plumbing must meet codes.
• Space and clearance: allocate room clearance for the bed and service access. Confirm the bed and main machine footprint (see model table below) and allow safe patient transfer and emergency access.
• Regulatory and clinical governance: determine local credentialing and informed consent workflows; factory training covers device operation, not clinical credentialing.

Required device and safety knowledge every trainee must master

Trainees must understand the system architecture and the safety interlocks that protect patients and equipment. Key topics for classroom or remote theory:

Hands‑on operation syllabus

Pre‑shift checks (must be demonstrated)

• Visual inspection of machine and bed for damage, confirm supplied accessories and disposable guide head availability.
• Confirm inlet filter installed (5μm specification) and potable water connection pressure stable.
• Power on and boot sequence: confirm dual screens come online and system self‑checks complete.
• Run an automatic pipeline cleaning cycle and interpret status messages.

Patient setup and operating the MK series controls

Trainees must show competency in:

• Explaining the procedure and obtaining informed consent (clinic policy).

Monitoring and alarms

Clinical skills and patient management

Factory training addresses device operation; clinics remain responsible for clinical protocols. The operator syllabus should include:

• Intake screening and documented contraindications per your clinic’s medical oversight.
• Informed consent, dignity measures, and privacy controls in the treatment room.
• Comfort measures during therapy and procedures for patient discontinuation if needed.

Consumables, hygiene and pipeline management

Use only the specified disposable guide heads and follow manufacturer instructions for pipeline automatic cleaning. The machine supports automatic pipeline cleaning, incoming water filtration and disinfection — document each completed cleaning cycle in patient records. Confirm you have local suppliers for replacement peristaltic pump tubing and disposable guide heads before onboarding.

Device‑specific practical modules (product facts used)

Use these MAIKONG product facts during training demonstrations so trainees learn to measure real performance against the spec:

Delivery acceptance checklist for MAIKONG systems

At handover confirm each item below and attach results to the delivery report before signing acceptance.

• Visual inspection of crate and machine for transit damage; unpacking photos on file.
• All accessories and consumables delivered and itemised (hand remote, disposable guide head samples, scale medicine cup, tubing, instruction manual).
• Electrical hookup verified by licensed electrician to match machine configuration.
• Automatic pipeline cleaning cycle run successfully and documented.

Acceptance test steps to sign off

1. Power on and confirm boot and self‑checks complete; record firmware/software version if shown on screen.
2. Run a dry functional test: actuate backrest, test remote, verify pump primes without patient connection.
3. Trigger a pressure alarm condition (per manufacturer method) and confirm machine alarm and automatic stop behavior.
4. Confirm automatic cleaning and flushing functions operate and that camera and observation screen display correctly.
5. Document all results and keep signed acceptance by owner and MAIKONG technician (or authorized installer) on file.

Assessment and certification of trainees

Instead of prescribing numerical session counts, we recommend a competency‑based certification that requires:

• Passing a written checklist covering device functions, safety interlocks and cleaning procedures.
• Completing observed practical skills: pre‑shift checks, assembly of single‑use infusion, starting/stopping infusion, responding to pressure and temperature alarms and performing pipeline cleaning.
• Successful demonstration of at least one supervised patient flow (or clinic‑approved simulation) with documented supervisor sign‑off.

Keep trainee records, signed competency checklists and refresher training logs in each operator’s personnel file.

On‑site vs remote training: scope and realistic boundaries

On‑site training (recommended for first installations): full machine setup, hands‑on practical modules, acceptance tests and supervised live sessions. Remote training is effective for classroom theory, user interface walkthroughs, troubleshooting, and follow‑up Q&A. Remote instruction cannot replace on‑site acceptance tests, nor can it legally substitute for local electrical or plumbing work. We provide both on‑site factory training and remote follow‑up support; responsibilities for local electrical/plumbing work, consumable stock and clinical credentialing remain with the clinic.

Evidence

Risks and limitations

This document is operational guidance and not medical advice. We do not prescribe clinical protocols or certification criteria mandated by local regulators; clinics must ensure clinical governance, credentialing and local code compliance. Specific electrical and plumbing code compliance for U.S. facilities must be confirmed with local licensed contractors. Product facts are supplier‑reported; check the delivered unit and model manual for exact configuration and software versions.

Useful acceptance checklist (compact)

• Unpacking photos and damage report
• Accessory inventory confirmed
• Licensed electrical sign‑off
• Water inlet filter (5μm) present
• Boot and dual‑screen test
• Heating to 37±2℃ verified
• Flow range verification 0–830 ml/min
• Pressure alarm test and auto‑stop verified
• Automatic pipeline clean cycle complete
• Trainee practical sign‑offs attached

One practical next step

Disclaimer

This content is provided for learning, information sharing and professional communication only. It is not medical advice and is not a basis for treatment or diagnosis. Confirm suitability, operation and purchasing requirements against the product manual, local regulations and qualified professional guidance.